VoIP Ceiling Speaker V2 (with Night Ringer)

Overview

The CyberData SiP-enabled V2 Ceiling Speaker is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) public address loudspeaker (IP Speaker) that easily connects into existing local area networks with a single CAT5 cable connection. The speaker is compatible with most SiP-based IP PBX. In a non SiP environment, the speaker is capable of broadcasting audio through multicast. Its small footprint and low height allows the speaker to be discreetly mounted almost anywhere.

The VoIP Ceiling Speaker can be configured as a Night Ringer with two SIP extensions. One extension can be assigned to a page group for auto answer paging. The second extension can be assigned to a “First-to-Answer” Night Ring group with IP phones. An audio ring file is activated when the second SIP extension of the Ceiling Speaker is dialed. If any of the IP phones in the ring group is answered (or if the caller hangs up), the Ceiling Speaker stops ringing.

Use the Speaker Calculator below to determine the approximate number of speakers needed for any given space.

The speaker calculations are based on equal-sided, unobstructed rooms. For elongated rooms like hallways or for obstructed rooms, additional ceiling speakers may be required.

Key Features:

• SIP (RFC 3261) compatible
• Night Ringer function
• Plays audio from multicast
• Web-based configuration
• Paging prioritization and background music
• Web-based firmware upgradeable
• External volume control
• Small footprint
• High efficiency speaker driver
• PoE 802.3af Enabled (Powered-over-Ethernet)
• IGMP l SIP endpoint or multicast group member
• Network-adjustable speaker volume
• Peer-to-peer capable
• Can drive one ext. analog speaker for more volume

Features

VoIP Ceiling Speaker V2 (with Night Ringer)

Support and Downloads

VoIP Ceiling Speaker V2 (with Night Ringer) Datasheet